Bearhawk Gascolator

Made from 6061-T6 Aluminum Min. Internal port size - 5/16 Dia. Max. Operating Pressure - 150 psi.
Gascolator is 2 1/2” Dia. Overall Height is 3 inches, Mounting is by (2) 1/4-20 tapped holes on top surface.
Inlet and outlet are 1/4 NPT Pipe. A 1/8 NPT Quick drain is used on the bottom of the bowl.
Seals are Std. Viton 'O' rings © R.E. Barrows 3-2-08
To order, visit http://bearhawkaircraft.com

This article is available for purchasers of 2008 Beartracks access. Click here to purchase access or validate your prior 2008 subscription. Multi-year bundles are available here.

Fuel System Updates, Lowering AN804 Tee

This article is available for purchasers of 2007 Beartracks access. Click here to purchase access or validate your prior 2007 subscription. Multi-year bundles are available here.

Making Fuel Quantity Sight Gauges

Source: 2007 Q3 Beartracks, Peter Stevens
The materials for the sight gauges are as follows:

Articles with the green titles are part of a kit builder manual section. If you own a quick-build kit, this section is included with your kit. If not, it is available for purchase.

2006 Russ Erb Update

This article is available for purchasers of 2006 Beartracks access. Click here to purchase access or validate your prior 2006 subscription. Multi-year bundles are available here.

Aux Tank Installation In Your Bearhawk

Source: 2005 Q3 Beartracks, Mark Goldberg
In the October 1996 issue of the Beartracks, Bob Barrows gives builders his design for an 11-gallon auxiliary fuel tank that fits in the third bay from the wingtip of each wing. Bob didn’t exactly encourage installation of these aux tanks.

This article is available for purchasers of 2005 Beartracks access. Click here to purchase access or validate your prior 2005 subscription. Multi-year bundles are available here.

Fuel Cap Cotter Pin and Lubrication

Source: 2004-Q2 Beartracks, Eric Newton

Bob, as I mentioned to you on the phone, I recently made the vented fuel caps. As a beginner with the lathe, it was a great project that I had fun making.

This article is available for purchasers of 2004 Beartracks access. Click here to purchase access or validate your prior 2004 subscription. Multi-year bundles are available here.

Bearhawk.tips

Tips for building your Bearhawk airplane