1999 Engineering Notice Regarding Upper Front Door Hinge Positioning (416 and below)

Engineering Notices


Source: 1999 Beartracks, Bob Barrows

Reference plans number 416 and below, Drawing #16. As shown in the drawing below change the 5 1/2" dimension to 5 3/4" to increase clearance between door frame and bottom of the wing in the open position. If the fuselage is already welded up, adjust hinge location for needed clearance.

You are not yet authorized to view this page. Learn more here.

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this post.
Loading...