1998 Inboard Flap Lever Engineering Notice (280 and below)

Source: 1998 Beartracks, Bob Barrows

Reference drawings #12 and #14 for plans serial numbers 280 or below.

Inboard Flap Lever

The inboard flap lever arm was shortened from 4-1/8" to 4" for clearance with the aileron cable. If you have completed this assembly you may remove up to 1/16" from the tip of the flap lever arm for clearance.

You are not yet authorized to view this page. Learn more here.

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this post.
Loading...